Connecting to the Alarm Panel

From DSC WebSA
Revision as of 17:22, 30 April 2014 by Razhar (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Connecting To The Alarm Panel

PC-Link

pc link settings
  • Required Information

-Panel ID Code -DLS Access Code -PC-Link Port (Assigned under Administrator Tools – Connection Settings)

When you choose PC-Link for the connection type you will be prompted to enter the Panel ID code, DLS Access code and chose which Com port that you have the PC-Link cable connected to (Under Administrator tools). After entering all information you would then want to save the changes to the account. Immediately following DLS Web SA will try to start to connect to the panel. At this point you would want to prep the panel for the PC-Link connection by going into programming on the keypad and entering section 499, enter the installer’s code and then 499 again. This will prep the panel for this connection and attempt to connect.


PSTN

pstn settings
  • Required Information:

-Telephone number -Panel ID Code -DLS Access code

Once all information has been entered and you choose to save the account, the software will automatically try to connect to the panel using the information provided.





Incoming PSTN

incoming pstn settings
  • Information required:

-Panel ID Code -DLS Access code -Expiration Time

After populating all required fields save the account, this will start the time the software will wait in what was programmed under the Expiration time.



IP

ip settings
  • Required Information:

-Panel ID Code -DLS Access Code -GS/IP Installers Code -Expiration time

After populating all required fields save the account, the software will attempt to connect to the panel.





Incoming IP

incoming ip settings
  • Required Information

-Panel ID Code -DLS Access Code -GS/IP Installers Code -Expiration time

After populating all required fields save the account, this will start the time the software will wait in what was programmed under the Expiration time.